Blog

Blower is the equipment that undertakes the transfer of emitted air at low pressure or high flow. Blowers rotate their fans with the support they get from the motor. It has two different uses, as vacuum or blowing. As a result of the rotation of the fan, the air in the suction part is vacuumed. The trapped air is pushed to the outlet after a point. In this way, blowers also fulfill their duties.

What Does Air Blower Do?

Blower systems are largely used to transport air. The sucked air must pass through the filter absolutely. Repulsion should only occur with this filtering. Otherwise, dirt accumulates in the body or lobes over time. Unfortunately, this situation brings with it a serious wear.

In addition to wear, working efficiency is also adversely affected by this situation. Because blockages occur in the suction area or the discharge section. In order to prevent this situation, it is important to have a safety valve. In addition, the blower should not be reversed. Failure to absorb air in the flow area leads to a reduction in the life of the product and decreases its efficiency.

Blower is often compared to fans in terms of intended use. Because both are used for air circulation. But the blowers are focused on one point only, while the fans control the perimeter of the area. For this reason, while the fans reach much larger areas, the blowers work for a special area. The average pressure ratio in blowers is maximum  1 bar . Blower products are divided into two as double stage and single stage blowers. Blower products consist of fan, inlet-outlet and outer cover.

What Should Be Considered When Using Blower?

When you will use the blower product, you should decide the place correctly. The used area should be measured and the air flow direction should be determined.

On the other hand, when you run blower products, you should check the oil level frequently. Special attention should be paid to the fact that the blower is vibrating.

The blower, which occupies a very important and large space in the industrial field today; It is evaluated at many points from food washing to paper handling, from suction equipment to automatic filling machines. Blower products have very important and tangible benefits. For example, these special products are effective in providing oil-free air or gas.

On the other hand, maintenance is very simple and cost is low. It is also long-lasting and not easily destroyed. You can take control with products with low noise levels.

Blower is also known as vacuum pump or centrifugal fan. You can contact us as you wish to get more detailed information about the blower, which is accepted as a mechanical device, and to reach the blower products.