Blog

Blower is the name given to the equipment that transfers the air in the emissive environment at high flow or low pressure. It rotates the fan thanks to the force transmitted from the motor. It has two different uses as vacuum or blowing. The fan in the single-stage blowers rotates and vacuums the air in the suction section. The air trapped inside is then pressurized towards the outlet direction and thus fulfills its function. Single stage blowers are generally preferred for conveying air.

The air sucked in the single-stage blower must be pushed after passing through a filter. Otherwise, dirt may accumulate in the stem and lobes. As a result of this accumulation, abrasions may occur. After wear, the working capacity and working efficiency of the blower are also adversely affected. Blockages occur in the discharge and suction parts, so it is absolutely necessary to have a suction filter and to control the flow there.

The most important feature of these devices is that they rotate the fan and perform air transfer thanks to the force they receive from the engine. Single-stage blowers generally work with the help of an electric motor and serve to absorb the air required for the environment.

These devices, which are also used to perform vacuuming according to the usage method or connection type, are preferred directly or indirectly in almost every field of the industry. It is used for a very long time in every application where high air flow is required. In general, single-stage blowers are a type of blower with a flow rate of 40-1370 m3/hour, pressures of 0-460 mbar and engine powers between 0.2 and 18.5 kW.

Where is Single Stage Blower Used?

If we list the usage areas of single-stage blowers:

• Car washing

• Paper cutting

• Exhaust, aspiration, cooling, delivery, ventilation, etc. in all areas deemed necessary for

• Sewage, process stacks, etc. gas flow through

• Bottle drying

• Water and wastewater treatment plants

• Jacuzzi

• Post-drying process in printers

• Fermentation

• Providing oxygen in pools

• Burning a heater

• Pipe cleaning

• Vegetable and fruit washing

• Areas such as dust and particle transport

What Should Be Considered When Choosing a Blower?

Each equipment in it has its own conditions. First of all, the place where the blower will be located must be determined correctly. After measuring the area to be used, the air flow direction is determined. Fastening bolts, belts and other similar apparatus are carefully checked. The use and supply of necessary accessories is important. These accessories are products such as suction filter, check valve, vibration wedges, connection pipes, flexible connections, pressure relief valve, manometer.

What are the Benefits of Blower Use?

The blower has many advantages. They generally give off oil-free air or gas, thus providing a regular flow of air and gas. It is very easy to maintain. At the same time, they do not require any extra maintenance costs. It also provides a great advantage in terms of longevity. One of the most common issues with this type of equipment is the high noise level. However, the noise level is generally low in centrifugal blower types. This is a factor that significantly affects its preference.

What Should Be Considered When Choosing a Single Stage Blower?

Wrong selection of the blower to be used; It can cause poor performance as well as result in unnecessary expensive electricity bills. Things to consider for industrial application to give good results:

• It is necessary to determine the location of the blower.

• The area to be used must be measured.

• The air flow direction needs to be decided.

• The installation pattern needs to be determined.

• Conditions such as the temperature of the air that will enter the blower, where it will enter and how it will enter must be determined.

• The pressure drop in the flow of air outside the duct should be determined.

• The required positive pressure needs to be determined.

• Ambient temperature should be constant.

• The required air flow rate should be determined.

• It should be determined with the necessary accessories and used according to the blower specifications.